"It is unavoidable that an image detail will progressively become lost atcritical stages of the digital image making process. Without corrective sharpening, a printed image will appear softer than expected."
Camera lens is one of the factors that affect sharpness of images. We are all aware that cheaper inferior lenses will produce less sharp pictures but even if we use the finest quality lenses and digital equipment, it is also inevitable that the capture/scanning process will lead to some image degradation and an apparent loss of sharpness before we even start editing it.
Printing is also one of the factors that affect sharpness of images. By translating pixels into an image that is printed via a mechanical process will inevitably incur even more loss of sharpness.
Unsharp masking relates to the reprographic film process whereby a light, soft, unsharp negative version of the image was sandwiched next to the original positive during exposure. The technique was used to increase the edge sharpness on the resulting plate.
For Adobe Photoshop CS3, the only sharpening filters ever need are
a) Unsharp Mask (USM)
and
b) Smart Sharpen filter
The main aim when using the USM filter is to increase the apparent sharpness and try to minimize the amounth of artifacting that can be introduced by the sharpening process.
I am using my own image for the exercise of sharpening for print.
The image below was un-sharped and was saved directly from RAW file image.
ORIGINAL UNSHARP

VERSION 1 - WEAKEST SHARPNESS

VERSION 2 - MEDIUM SHARPNESS

VERSION 3 - STRONGEST SHARPNESS
The stronger the sharpness applied to image, the more artifacts and noise noticable which is permanently degrade the picture.
In this exercise I varies amount of sharpness in
"amount" and varies the Radius which conrols the width of the sharpening effect.
As the "radius" setting is increased , the edges are more emphasized.
"Threshold" setting controls which pixels will be sharpened based on how much the pixels to be sharpened deviate in brightness from their neighbours.
I have all four images printed. To my surprise, the extreme version (the one that I applied sharpness the most) doesn't look as bad as it shows on monitor but it still looks quite unnatural and the skin is full of freckles.
Version 2, the medium sharpness, image does not look as bad. It does look a lot better than the extreme, version 3, one.
It might not look as natural as it should be but I think i might prefer this one the most.
Version 1, weakest sharpness looks really soft and I couldn't tell if this image has been applied with USM at all but until I compare to the original, untouched, one that I could tell the different.
The original version looks too soft now and lack of sharpness when printed.
This shows that printing does make the image loss its sharpness.
And for this reason it is always necessary to "sharpen for print".
This means if you are preparing a picture to appear in print, you should apply an extra amount of sharpening, beyond that which makes the image look good on the computer display.
Using Unsharp masking on it's own doesn't really make the image pretty easily. The book has suggested using Luminance sharpening but applying "fade unsharp mask" right after applying Unsharp Mask and select "Luminosity" mode. This method does improve the look of the image.
Sharpening image using Photoshop CS3 RAW files converter
Weak setting:

Medium setting:

Strong setting

Sharpening in raw converter does not give exaggerating result as it does in Photoshop. 3 different setting can not tell much different when printed.
No comments:
Post a Comment