Monday, 31 May 2010

Exercise 13 - Managing colour

Colour Cast :
a) Overall bias towards one colour in a colour photograph
(http://en.mimi.hu/photography/colour_cast.html)
b) An unwanted amount of one or more colours in an image
c) a tint of a particular colour, usually unwanted, which affects the whole of a photographic image evenly (Wikipedia)

1)"Blue" colour cast
This photo was taken during the snow. The image looks quite "blue"
JPEG
JPEG
using curves and and levels layers in Photoshop CS3


RAW


adjusting with WB slide bar, exposure, contrast and some mid tone curve


Observation:
The colour cast of the same image, on JPEG, however, is more predominant while the RAW image is less.

2) Concrete surface, known "Grey"
JPEG
by using curve and level in Photoshop CS


The adjusted image above is not the same as the real image but it does look sharp and nicer!
This image was taken with compact camera therefore has no RAW image!

3)Snowman under tungsten lighting (Orange-ish)
as shot in JPEG from camera with auto WB

Using Photoshop CS3 with Colour balance layer,
(OK-ish)

Using WB slide bar, tint slide bar and some minor adjustment of contrast

closer to the real scene

Conclusion:

Colour cast can be removed/adjusted from RAW image much easier using software (raw converter) with more accurate colour and without lost of detail.
However Colour cast can also be removed from JPEG image at an accpetable colour faster using photoshop but with lost of quality.

The acceptable level of the colour cast does really depend on a personal taste.

An image with certain colour sometimes give the viewer a different feeling altogether.

Sunday, 30 May 2010

Exercise 12 - Managing tone

I chose a low contrast (flast) photo for this exercise.
1) JPEG

by creating new adjustment layer using "levels" and adjust black and white point to the edge of clipping. in this case black point from 0 to 60 and white point from 255 to 185.


2) RAW


by adjusting contrast, exposure, WB, tones and curves

adjusting RAW files
1) can create more more than one adjustment
2) has no data loses, unlike adjusting JPEG

Tuesday, 25 May 2010

Exercise 11 - Raw

I have always been shooting with jpeg and raw from the very beginning of having my DSLR camera. (not right from the start but quite the very beginning)
Most of my photos taken for the past 7 months (started 1 month after buying the DSLR camera)
Reading from the Photography magazine, Photoplus and Digital Camera, all the professional photographers have always recommended to shoot in raw.

I set WB in AWB mode because a lot of time it gives correct setting. The two images below were taken a few minute apart with the same setting but they came out with different colour.
colder tone and feeling

warmer feeling which I prefer


Currently I am using Photoshop CS to process my raw and jpeg but I was advised by the tutor and some of my more experienced photographer friends that I should use "Light room" to process raw images. I might have to look into it. (but not yet)


I chose 3 images from the library I took not so long ago. They were shot in 3 different lighting
. I didn't plan and shoot three new images because I only want to compare the quality between the images.
1) Day light
The image below could be considered as HDR too but the image was taken on a sunny day. I meter at the sky because I love how the cloud is formed so the foreground is a bit dark. I don't have ND grad filter at the moment.

JPEG - this image has no adjustment. I could adjust the lighting using curves / level but I am not really good at it (just yet). I have noticed though that the histogram has broken after applying the adjustment.


adjusted from RAW version 1
adjusted WB only


adjusted from RAW version 2 adjusted WB and curve too. However the histogram for these 2 jpegs adjusted from RAW are not broken that means no detail has lost.

The shadow is still there (in the tree shade) that I can't reproduce detail.

I think next time I will have to either, take 2 pictures and merge exposure or use ND grad filter.

2) Artificial lighting

This was taken inside an exhibition hall. The light was mixed between tungsten and day light.Using Adobe Bridge viewing raw and jpeg, I can tell the different between the colour of image. The raw image, which contain complete data, has less colour cast, less orange which I prefer.
The histogram charts for both jpeg and raw are similar but not exactly the same. Raw image shows the shadow and highlight while the jpeg doesn't.

3) High dynamic range
jpeg
raw
These images were taken on a sunny day too so they could be considered "day light"
Using Adobe Bridge to view the RAW and JPEG images, I could easily see the different of colour between raw and jpeg. I prefer the raw one because the sky has deeper blue colour.

Conclusion:
From all 3 different images (RAW and JPEG)
1. RAW contains all data which means when the raw image is adjusted using computer software, no data is lost while JPEG has been processed in camera therefore some data has been lost forever and during post-processing in computer software each time, more data is lost again. so the quality of Jpeg will be reduced.
2. viewing RAW image in the computer software can show highlight and shadow clipping while Jpeg can not.
3. RAW has (my) preferred colour whilte JPEG often looks fake. (but sometimes jpeg looks OK.
4. JPEG is easier and quicker to record and share while RAW has be to be processed before it can be uploaded and shared which is more time consuming.

For me: I will still continue shooting RAW and JPEG so that if need be, I can just use JPEG very quickly. But if time permitted, I will process RAW and turn to JPEG before sharing.

Tuesday, 4 May 2010

Exercise 10 - Colour cast and white balance

White balance is a process of adjusting the colour of image under different light source.
Different light source gives different colour temperature measured in Kevin.
below is the colour temperature from http://www.cambridgeincolour.com/tutorials/white-balance.htm
Color Temperature Light Source
1000-2000 K Candlelight
2500-3500 K Tungsten Bulb (household variety)
3000-4000 K Sunrise/Sunset (clear sky)
4000-5000 K Fluorescent Lamps
5000-5500 K Electronic Flash
5000-6500 K Daylight with Clear Sky (sun overhead)
6500-8000 K Moderately Overcast Sky
9000-10000 K Shade or Heavily Overcast Sky

By adjusting the colour of image depending on the lightsource, the image will appear white (or natural).
I mainly use AWB in my camera to adjust the white balance by itself but some of the times I still use the white balance slider in RAW format to re-adjust in case it still does not look the way I like it.

1. Sunlight
:
Under the sunlight, the colour temperature ranging between 5400-5500K, the light seem white as is. The AWB adjust the white balance closer to "daylight" setting.
The "shade" and "cloudy" setting make the image looks too yellow.
AUTO
DAYLIGHT
CLOUDY
Shade

2.Cloudy:
In this instance, the AWB adjusted the colour to be toward "daylight" but I prefer the "cloudy" setting. It gives moody feeling to the image.
Auto
daylight
cloudy
shade

3. Open shade on a sunny day
Again, the AWB adjusted the colour closer to "daylight" but "shade" setting does not look that bad to me.
auto
daylight
cloudy
shade

4. Mixed lighting
4.1) taken from inside
This mix lighting of daylight and tungsten light makes the colour temp different in the same image.
The image below, AWB adjusted the colour based on the lightsource outside the house that is it adjusted the colour closer to daylight making the outside scene looks white while the inside colour looks too orange.
daylight
The tungsten setting has made the indoor colour look more white while the outdoor light look too blue.
tungsten
auto

4.2) taken from outside
The image below, AWB still adjusted the colour based on the lightsource outside the house that is it adjusted the colour closer to daylight making the outside scene looks white while the inside colour looks too orange.
daylight
The image below has the same result when WB setting to tungsten, inside colour looks naturally white while the outside colour look too blue.
tungsten
auto

I think even though we are trying to make the image look white when taking photos but sometimes the non-white colour of photo makes it more moody and it emphasise the time of the day when the photo was taken.

Sunday, 2 May 2010

Exercise 9 - Scene dynamic range

Five different scenes:
1) Indoor light - incandescent

setting: f/10 exposure 1" 1/3 ISO 100
brightest: at the light exposure 1/50"
darkest: behind the curtain 3" 1/2
EV = 4.85 stops

2) Richmond green

setting: f/13 exposure 1/20 ISO 100
brightest: at the sky exposure 1/30"
darkest: at the shadow 1/4
EV = 9.61 stops

3) footpath - shade with sunlight

setting: f/8 exposure 1/50 ISO 100
brightest: at the sky exposure 1/200"
darkest: at the shadow 1/8
EV = 9.06 stops

4)
river Thames - direct sunslight

setting: f/8 exposure 1/125 ISO 100
brightest: at the sky exposure 1/800"
darkest: at the shadow 1/25
EV = 10.69 stops

5) tree shade

setting: f/8 exposure 1/2" ISO 100
brightest: at the sky exposure 1/4"
darkest: at the shadow 1"1/4
EV = 6.0 stops


Scene with high contrast , with bright sunlight (scene 4) has highest f-stops
Scene with low contrast, no light source (scene 5) has low f-stops